The Tech

Unlike standard cast-resin or concrete units prone to weight, access issues and surface degradation, our firepits employ architectural construction methodologies whilst maintaining a genuine 'carved from solid stone' appearance:

​​

 > The Space Frame: Rigid but lightweight chassis fabricated from 50x20mm rectangular hollow-section 304 stainless steel.

 > Surface Cladding: 6mm Italian or Spanish porcelain, fully mitred edges with no joins, up to 3000mm in length. Up to 30 colours and finishes.

 > Load Profile: Monolithic stone aesthetics achieved at a fraction of the weight, allowing two-person delivery and installation on restricted-access roof terraces or inner gardens.

 > Dimensional Parameters: Built to custom dimensions up to 3000mm as single-piece units (larger spans achieved via minimal-visibility architectural joins).

 > Integration: Rebatelines, built-in levelling, internal drainage, and integrated ventilation standard; burner units lift out without tools via flexible lines.

 > Firetable Base Finishes: Available in matching porcelain, brushed 304 stainless steel (zero visible welds), or powder-coated galvanised steel (custom RAL).

 > Options: Integrated shadow-gap & LED lighting.

​​

Frameless Wall Fires: Thermal & Environmental Engineering

Engineered to maintain a clean, frameless aperture over extended operational cycles without thermal distortion or acoustic pinging.

​

 > Chassis Construction: Rigid, black weather-coated 2mm galvanised steel or 304 stainless steel standard; 316 marine-grade stainless steel specified for coastal projects. Internal drainage, and integrated ventilation.

 > Thermal Management: Designed to absorb daily heat-cycle expansion and contraction without metal fatigue or damage to aesthetic surfaces.

 > Finishing Detail: Removable folded edge allow contractors to render or tile directly to the firebox opening.

​

Signature Burner Technology

 > Aerated Combustion: The Signature UF950 burner utilises a regulated gas/air mix for a high-heat, realistic yellow flame without sooting or staining.

 > Wind Resistance: Operates without unsightly glass windscreens. The safety pilot is concealed below the top surface while remaining fully compliant with normes.

 > Enclosure Rating: All electronic components, motorised valves, and receivers are housed in an IP-55 rated enclosure.

 > Control Interfaces: Handset remote, mobile application, or integration with home automation protocols.

 > Media: Formed ceramic glass aggregate (fired at 1600°C) prevents degradation, blowing, or shifting compared to loose volcanic rock. Optional High Definition ceramic logs or pebbles.

​​​

Burner Regulatory Compliance & Certification
 

 > Certification: UKCA/CE certified under the GAD essential requirements using BS EN 613:2001+A1:2003, for installation throughout Europe - and made in the UK in an ISO9002 environment. Notified Body identification PIN number CE 0359. 

 > Gas Compatibility: Engineered specifically for UK gas types G20, G30, G31 and pressures (avoiding compatibility issues inherent to parallel-imported North American or Chinese producs). Use on G30 (Butane) isn't recommended.

 > Servicing: Urban outdoor gas burners engineered to avoid being fixed in place and will lift out on flexible energy suppiles without tools.

 > Installation: Mandates Gas Safe registration (including supplied LPG conversion kits).

​

Technical FAQ

Do Urban Outdoors firepits require glass wind screens?

No. Wind resistance is engineered into the burner positioning (sub-surface pilot) and protected IP-55 internal components, eliminating the need for protective glass barriers.

​

What are the structural weight advantages?

By substituting cast concrete with a 304 stainless steel space-frame and 6mm porcelain skin, structural dead-load is drastically reduced, enabling manual two-person site handling.

​

Are custom dimensions available?

Yes. Every unit is fabricated to exact project specifications up to a 3000mm continuous width.

 

What grade of steel is used for marine environments?

316 marine-grade stainless steel is specified to prevent saline corrosion on coastal roof terraces or beachfront properties.

​​

Is the Signature burner remote control?

Yes. The remote control handset controls ignition, the safety system, and flame height/heat output. Optionally, the burner can be controlled by phone/tablet app via home WiFi or can be connected to home automation via Control 4 protocols.
 

Download

Infrastructure guidance documents, images and drawings here.